Disposable Viral Sampling Tube

Product Description:
The Viral Sample Collection Kit is designed for collection, transportation and short-time storage of clinical specimen total DNA/RNA of saliva, blood, serum, stool and body fluid, etc. The preservative will lyse the organism and inactivate the cells, bacteria and virus. The stored samples can be used in subsequent clinical experiments such as DNA/RNA extraction, PCR testing or sequencing.
Viral sampling tube is used to collect and transport the viral RNA at room temperature. It includes one swab, one tube with transport medium, one biohazard bag. The whole package can be customized.

Product Feature:
1.The sampling swab uses advanced jet implanted nylon fuzz technology. Compared with conventional fiber swabs, the sample is easily penetrated, diluted, and trapped in the fiber. The nylon flocking swab has outstanding sample collection and release capability, and the release rate can reach 90%, which is much higher than that of the conventional fiber swab.
2.Light red Hank‘s solution contain antibiotics that can effectively inhibit the reproduction of bacteria and fungi.
3.Colorless and transparent preservative solution can effectively inactivate virus and reduce the degradation of viral nucleic acid. 

Product Composition:
1.Sample collection tube:
Tube body and cap are made by Polypropylene, No deformation after HTHP(121 Celsius, 15min), no embrittlement under low temperature (-196 Celsius). it can bear static extrusion and dynamic impact. Taper bottom design makes it bear centrifugation and shaking. Leakage proof.
2. Sample storage liquid:
According to vast test of the influence to cells among Basic liquid, buffer system, protein stabilizer, freezing protective agent, amino acid,etc. 
3. Flocked swab:
The nylon is adhered vertically and uniformly on the surface of swab tip, which can improve the efficiency of collecting and releasing cells and liquid samples.

Product Specification:

Application Methods:
Step1: Take out the flocked swab and get sampling with it from right body parts;
Step2: Remove the tube cap, put the swab into the transportation medium;
Step3: Bend the swab at a 180 degrees angle to break at the appropriate point;
Step4: Tighten the cap, shake it several times and complete the sampling.